Celebrating over 30 years in the USA
734-453-2188 | 41208 Capital Dr. Canton, MI 48187 USA
Email: info@miicamerica.com 

734-453-2188

Products

Standard Benders


ECO Bender Series

Available in three different types:

• ECO bender E -type, all electric, equipped with servomotors
• ECO bender C -type, equipped with DDV servopump and servomotors
• ECO bender O -type, equipped with regular hydraulic power and servomotors

ECO bending machines are constructed robustly, with an overall small footprint. Because each series uses a compact bend-head which is driven with a patented link mechanism, MiiC benders minimize bending collisions during production while attaining high levels of precision.  A graphic user interface enables operators to execute bending production with minimal training.  Due to their modular design, MiiC benders are easily customizable allowing your facility to adapt to ever changing production needs.  By incorporating loaders, transfer robots and unloading stations, MiiC benders can be transformed into fully automated production cells.

Pipe SizeMachine ModelBenefits
1/16” – 1” Pipe

Or

1.59 – 25.4 mm
S-ECO 5 - 25* Standard bending capability
* User-friendly operation
* Environmental-friendly
* Small OD pipes
1¼” – 5” Pipe


Or


31.75 – 127 mm
M-ECO 35 - 70* Standard bending capability
* User-friendly operation
* Environmental-friendly
* Medium/large OD pipes
1¼” – 5” Pipe


Or


31.75 – 127 mm
L-ECO 80 - 200* Standard bending capability
* User-friendly operation
* Environmental-friendly
* Medium/large OD pipes

ECO-10


MiiC ECO-10 Robotic BenderTechnical Specifications:

  • Capable of bending aluminum, copper, steel and stainless steel tubes
  • Tube Diameter: up to 150 mm
  • Standard Tube Length: 4500 mm (longer lengths possible)
  • Available Models: ECO-5-R through ECO-150-R
  • Operating System: Windows XP
  • USB, Touch screen

 


ECO-35T


MiiC ECO-35T Robotic BenderTechnical Specifications:                                             

  • Capable of bending aluminum, copper, steel and stainless steel tubes
  • Tube Diameter: up to 200 mm
  • Standard Tube Length: 4500 mm (longer lengths possible)
  • Available Models: ECO-5 through ECO-150
  • From two bending stacks up to 5 (optional)
  • Bending radius up to 500mm
  • Operating System: Windows XP

Cut off Bender

MiiC Standard Bender Image 1When bending tubes for exhaust manifold, a cut-off tool option can be added to our ECO series benders.  This added cutter can cut the tube to its appropriate length either before bending or after bending.  By doing this way, extra tubing material can be dramatically reduced.  As a result additional cut-off process is eliminated.




1-D Benders

MiiC Standard Bender Image 2When bending tubes with large bend angle and tight radius, the tube crack broken or the wall thickness can becomes very thin.  In order to overcome these problems under such extreme bending conditions, a precisely-controlled back-up booster can be added to the carriage to push the tube forward.  Coupling with a high DBB feed rate, Opton-patented back up booster can dramatically enhance the bending capability for regular ECO series benders.



Aero Benders

Instead of having only 3-4 axes servo-controlled for other benders, all axes (as many as 16) on an AERO bender are servo controlled by using either servo motors or DDV servo pumps, which means all machine movements and positions can be precisely controlled in a closed-loop manner.  By doing so, the machine’s transient response time and steady state error are dramatically improved.  In the meantime, machine’s sensitivity to load parameters is reduced.   No mechanical setup or tuning up is needed.  As a result, the skill level required on an operator is dramatically reduced.

Feature Highlights:MiiC Standard Bender Image 3
• Max. OD:  35.0 – 85.0 mm (steel)
• Max. tube length: 2000 mm
• No. of bending radii: 5 (standard)